Micro-ohmmeter Model 6292

AVAILABLE AUGUST/SEPTEMBER

• Perform tests normally or with both sides of the switch gear connected to the ground
• Four languages available through user selection
• Cooling system to improve the number of sequential tests that can be performed
• Programmable Test Duration to 120 seconds
• Direct viewing of stored tests on the instruments display
• Programmable and manual test current selection
• Accurately measures low contact resistances with test currents up to 200A
• Measures resistances up to 1Ω
• Low resolution of 0.1µΩ
• Large LCD digital display
• Stores up to 8000 test results
• USB communication interface
• Direct printout using DataView^® software and a PC
• Rugged, light-weight and water-resistant case

Model DL-1080
Model DL-1081

• 8 universal analog input channels
• 8 digital I/Os (individually configured as inputs or outputs)
• 2 relay outputs (NO, NC and common)
• RS485 interface (Modbus master or slave)
• 24VDC output to power up to eight 4 to 20mA transmitters
• Ethernet interface for LAN and internet use
• USB-device interface for configuring, monitoring and download
• USB-host interface for logged data retrieval through a USB flash drive
• Up to 32 configurable alarms
• Up to 128 virtual channels
• Detachable display
• Up to 100 channels can be logged at a user configurable rate
• Data downloading through the configuration software or through the freely distributed downloaded DLL

Model 400D-6
Model 400D-10
Model 4000D-14

• Easy access and measurement, even in confined spaces where access is difficult
• Measurement from 20mAAC to 4000A (model dependent)
• Available with 6", 10" and 14" sensor lengths
• Resolution down to 1mA (model dependent)
• Sensor diameter 1.77" to > 3.94" (sensor dependent)
• Auto-ranging
• HOLD feature
• Direct reading
• Compact and simple to use
• Flexible current sensor
• True RMS
• Safety rating of 600V CAT IV

Model PEL 102
Model PEL 103

• Measurement of RMS voltages and currents at 128 times per cycle and stored every second
• Measurement of VA, W and var power values (total and per phase) stored every second
• Measurement of VAh, Wh and varh energy values (total and per phase) per second with source/load indication
• Calculation of the cos φ Displacement Power Factor (DPF) and the Power Factor (PF) stored every second
• Calculation of Total Harmonic Distortion (THD)
• Measurement, calculation and display of the harmonics up to the 50th order for 50/60 Hz and 7th order for 400Hz
• Measurement of the DC quantities (RMS calculation)
• Display Measurements (PEL 103)
• Electrical network quantities are stored on a removable SD-Card
• Automatic recognition of the connected current sensors
• DataView software for data storage, real-time display, analysis and report generation with supplied pre-defined or custom templates
• Minimual programming required
• Compact and rugged case
• Versatile communication interface choices built in (USB, Ethernet, Bluetooth)