NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.

Model	Cat. #	Description	List Price	Quantity/Status	Distributor Stock Check
PEL 105	2137.57	Power & Energy Logger Model PEL 105 (No Sensors - Waterproof IP67) (Discontinued. Replaced by PEL 115 Cat. #2137.56) NIST Calibration ($176.00 each)	$0.00	Discontinued
PEL 105	2137.59	Power & Energy Logger Model PEL 105 w/4 196A-24-BK AmpFlex® Sensors (Waterproof IP67) (Discontinued. Replaced by PEL 115 Cat. #2137.58) NIST Calibration ($215.00 each)	$0.00	Discontinued

Model	PEL 105
Cat. #	2137.57
Description	Power & Energy Logger Model PEL 105 (No Sensors - Waterproof IP67) (Discontinued. Replaced by PEL 115 Cat. #2137.56)
List Price	$0.00
Discontinued

Model	PEL 105
Cat. #	2137.59
Description	Power & Energy Logger Model PEL 105 w/4 196A-24-BK AmpFlex® Sensors (Waterproof IP67) (Discontinued. Replaced by PEL 115 Cat. #2137.58)
List Price	$0.00
Discontinued

Model PEL 105 - Cat. #2137.57 (no sensors): Includes large classic tool bag, 5 ft USB cable, (5) black voltage test leads (with watertight cap) and alligator clips, power adapter (110/240) V w/ US power cord, (12) color-coded ID markers, 8 GB SD-Card installed, USB-SD-Card adapter, 9.6 V NiMH battery installed, printed quick start guide, high-voltage safety card, and USB drive with DataView^® software and user manual.

Model PEL 105 - Cat. #2137.59 (with sensors): Includes large classic tool bag, (4) water-tight 24-inch AmpFlex^® A196-24-BK sensors, 5 ft USB cable, (5) black voltage test leads (with watertight cap) and alligator clips, power adapter (110/240) V w/ US power cord, (12) color-coded ID markers, 8 GB SD-Card installed, USB-SD-Card adapter, 9.6 V NiMH battery installed, printed quick start guide, high-voltage safety card, and USB drive with DataView^® software and user manual.

Inputs	5 Voltage / 4 Current
Sample Rate	128 per Cycle				6.4 kHz at 50 Hz	7.68 kHz at 60 Hz
Specification	Range				Measurement Range	Resolution	Accuracy (Typical)
Volt
Vrms	1000 V P to N				(10 to 1000) V	0.1 V	± 0.2 % Rdg +0.2 V
Vrms	1000 V E to N				(10 to 1000) V	0.1 V	± 0.2 % Rdg +0.2 V
Urms	1000 V P to P				(17 to 1000) V	0.1 V	± 0.2 % Rdg + 0.4 V
Amps @ (50 and 60) Hz
Amps (1 V nominal) (excluding clamp accuracy	Probe dependent			0.2 %< I < 120 % Inom		Probe dependent	±0.2 % Rdg + 0.02 % Inom
AmpFLEX & MiniFlex (including sensor accuracy)	Range 100 A Range 400 A Range 2 kA Range 10 kA			200 mA to 120 A (5 to 440) A (50 to 2400) A 400 A to 12 kA		1 mA 0.1 A (0.1 and 1) A 1 A	± 1.2 % Rdg + 50 mA ± 1.2 % Rdg + 0.2 A ± 1.2 % Rdg + 1 A ± 1.2 % Rdg + 5 A
Frequency				42.5 to 69Hz		0.01Hz	±0.1Hz
Power
Watts (VA, var) P-Q-S				20 W to 20 GW 20 var to 10 Gvar 20 VA to 10 GVA		4 digits min	± 0.5 % Rdg + 0.005 % Pnom
Power Factor (Cos Φ/DPF)				-1 to 1		0.001	±0.05
Energy
kWh (kVAh, kvarh) P-Q-S		Up to 4 EWh / 4 Evarh / 4 EVAh (E = 1018 )					± 0.5 % Rdg
Harmonics		DC, 1 to 50
Volts & Amp %				(0.01 to 655.0) %		0.01 %	±1 % Rdg from 1 to 25
THD				(0.00 to 655.0) %		0.01 %	±1 % Rdg
General Features
Case			Design Rugged field case
Interface			Isolated USB, Bluetooth, and Ethernet, Wi-Fi, SD card for direct transfer to PC. Dataview software for real time data, configuration and reporting included
Memory			8 GB SD card (SDHC compliant, FAT32 formatted) 32 GB max
Display			LCD with backlight (4.2 x 3.3) in (107 x 84) mm
Real-Time Clock			Time and date stamp for Trend mode
Power			Phase to phase or phase to neutral (100 to 1000) VAC or external power pack (110/230) V (50/60) Hz 15 VA; Battery backup when power OFF, 60 min typical
Dimensions (L x W x H)			(9.65 x 10.6 x 7.1) in (245 x 270 x 180) mm
Weight			8.9 lbs (4kg)
Altitude Operating			2000 m (6560 ft)
Operating Temperature			(32 to 108.5) °F (0 to +42.5) °C from (10 to 85) % RH
Storage Temperature			(-4 to 122) °F; (-20 to 50) °C from (0 to 75) % RH with battery pack
Electro-Magnetic-Compatibility (EMC)			EN 61326-1 for emission and immunity
IP Rating			IP 67 per IEC 60529
Safety			IEC/EN 61010-1 (1000 V CAT IV Pol 4)

Quick Start Guides

PEL 105

Model PEL 105 - Español

Rent Now

Premiere Rental Partners

Software

PEL Family of Loggers Android Application

Firmware

PEL Power & Energy Meters Model 105 - Firmware

Applications - Graphic Illustrations

Generation, Transmission & Distribution

Videos

PEL App for Android

What's New in DataView 3.50

Español - Configuración de un PEL de AEMC mediante DataView^®

Español - Datos del PEL en Tiempo Real

PEL - Synchronized Recordings With Multiple PELs

Introduction To Data Loggers

Firmware Update for PEL

Data Aggregation for PEL^® and PowerPad^®

Model	Cat. #	Description	List Price	Quantity/Status
	2133.73	Extra Large Classic Tool Bag Replacement for Models: 3945/3945-B, 6240, 6255, 6292, 6471, 6505, 5050, 5060, 5070, 8333, 8335, 8336, 8435, 8436, 8510 & PEL105 Dimensions: (18 x 9 x 12) in	$60.00
	2137.82	Pole Mounting Kit for Model PEL 105, PEL 115 & PowerPad® Models 8435/8436 (Note: strapping to mount to a pole is not included)	$255.00
MR193-BK	2140.28	AC/DC Current Probe Model MR193-BK for use with Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435 & PEL Series NIST Calibration ($75.00 each)	$535.00
193-24-BK	2140.34	AmpFlex^® Sensor 24" Model 193-24-BK for use with Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series NIST Calibration ($75.00 each)	$335.00
193-36-BK	2140.35	AmpFlex^® Sensor 36" Model 193-36-BK for use with Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series NIST Calibration ($75.00 each)	$390.00
MN193-BK	2140.36	AC Current Probe Model MN193-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, PEL Series, L104 & L564 NIST Calibration ($75.00 each)	$353.00
	2140.40	Adapter – BNC Adapter for AC/DC Current Probe Model SL261 & SL361 to be used with Models 8220, 8333, 8335, 8336, 8436 & PEL 102 & PEL 103	$157.50
	2140.45	Replacement - Set of 12, color input ID markers for the PowerPad Series	$36.75
MA193-10-BK	2140.48	MiniFlex® Sensor 10" Model MA193-10-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series NIST Calibration ($75.00 each)	$290.00
2140.50	2140.50	MiniFlex® Sensor 14" Model MA193-14-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series NIST Calibration ($75.00 each)	$320.00
	2140.73	Lead - One 10 ft (3M) Black Lead (Waterproof cap) {Rated 1000V CAT IV} & One Black Alligator Clip {Rated 1000V CAT IV, 15A, UL} for Models 8435 & 8436	$39.00
196A-24-BK	2140.75	AmpFlex^® Sensor 24" (Waterproof - IP67) Model 196A-24-BK for use only with Models 8435, 8436, PEL 105, & PEL 115	$374.00
MA196-14-BK	2140.79	MiniFlex® Sensor 14" (Waterproof - IP67) Model MA196-14-BK for use only with Models 8435, 8436, PEL 105, & PEL 115 Special Order Only	$359.00	Consult Factory for Availability
MA194-24-BK	2140.80	MiniFlex^® Sensor Model MA194-24-BK (Replaces Cat. #2140.78) for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series NIST Calibration ($75.00 each)	$345.00	Consult Factory for Availability
	5000.14	Power cord 115V for Micro-ohmmeters, Megohmmeters, Power Instruments, Oscilloscopes & Ground Testers	$11.60
	5000.19	Power adapter (replacement) 110/230V with US power cord for use with models 8333, 8335, 8336, PEL 105, and C.A 6116	$220.00	Consult Factory for Availability
	5000.45	USB SD - card reader (replacement for Power & Energy Logger Models PEL 52, PEL 102, PEL 103, PEL 112 PEL 113 & PEL 115)	$18.20
	5000.67	Caps - replacement caps (set 4-lg, 5-sm) for PowerPad III models 8435, 8436, PEL 105, & PEL 115	$82.50
	5000.77	Cable reeling box for organizing leads less than 10 ft Instruction Sheet	$23.50
	5000.99	Clip - Safety Alligator - Black (1000V CAT IV, 15A, UL V2)	$12.50
SL261	1201.51	AC/DC Current Probe Model SL261 NIST Calibration ($75.00 each)	$0.00	Discontinued
	2140.46	Cable - 5 ft USB cable for Model 6290, 6292, 8333, 8335, 8336, 8345, 8435, 8436, C.A 6116, C.A 1727 and PEL Series (DISCONTINUED replaced by 2136.80 )	$0.00	Discontinued
J93-BK	2140.49	AC/DC Current Probe Model J93-BK (SPECIAL ORDER ONLY)	$0.00	Discontinued

Model
Cat. #	2133.73
Description	Extra Large Classic Tool Bag Replacement for Models: 3945/3945-B, 6240, 6255, 6292, 6471, 6505, 5050, 5060, 5070, 8333, 8335, 8336, 8435, 8436, 8510 & PEL105 Dimensions: (18 x 9 x 12) in
List Price	$60.00

Model
Cat. #	2137.82
Description	Pole Mounting Kit for Model PEL 105, PEL 115 & PowerPad® Models 8435/8436 (Note: strapping to mount to a pole is not included)
List Price	$255.00

Model	MR193-BK
Cat. #	2140.28
Description	AC/DC Current Probe Model MR193-BK for use with Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435 & PEL Series
List Price	$535.00
NIST Calibration ($75.00 each)

Model	193-24-BK
Cat. #	2140.34
Description	AmpFlex^® Sensor 24" Model 193-24-BK for use with Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series
List Price	$335.00
NIST Calibration ($75.00 each)

Model	193-36-BK
Cat. #	2140.35
Description	AmpFlex^® Sensor 36" Model 193-36-BK for use with Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series
List Price	$390.00
NIST Calibration ($75.00 each)

Model	MN193-BK
Cat. #	2140.36
Description	AC Current Probe Model MN193-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, PEL Series, L104 & L564
List Price	$353.00
NIST Calibration ($75.00 each)

Model
Cat. #	2140.40
Description	Adapter – BNC Adapter for AC/DC Current Probe Model SL261 & SL361 to be used with Models 8220, 8333, 8335, 8336, 8436 & PEL 102 & PEL 103
List Price	$157.50

Model
Cat. #	2140.45
Description	Replacement - Set of 12, color input ID markers for the PowerPad Series
List Price	$36.75

Model	MA193-10-BK
Cat. #	2140.48
Description	MiniFlex® Sensor 10" Model MA193-10-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series
List Price	$290.00
NIST Calibration ($75.00 each)

Model	2140.50
Cat. #	2140.50
Description	MiniFlex® Sensor 14" Model MA193-14-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series
List Price	$320.00
NIST Calibration ($75.00 each)

Model
Cat. #	2140.73
Description	Lead - One 10 ft (3M) Black Lead (Waterproof cap) {Rated 1000V CAT IV} & One Black Alligator Clip {Rated 1000V CAT IV, 15A, UL} for Models 8435 & 8436
List Price	$39.00

Model	196A-24-BK
Cat. #	2140.75
Description	AmpFlex^® Sensor 24" (Waterproof - IP67) Model 196A-24-BK for use only with Models 8435, 8436, PEL 105, & PEL 115
List Price	$374.00

Model	MA196-14-BK
Cat. #	2140.79
Description	MiniFlex® Sensor 14" (Waterproof - IP67) Model MA196-14-BK for use only with Models 8435, 8436, PEL 105, & PEL 115 Special Order Only
List Price	$359.00
Consult Factory for Availability

Model	MA194-24-BK
Cat. #	2140.80
Description	MiniFlex^® Sensor Model MA194-24-BK (Replaces Cat. #2140.78) for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series
List Price	$345.00
Consult Factory for Availability

Model
Cat. #	5000.14
Description	Power cord 115V for Micro-ohmmeters, Megohmmeters, Power Instruments, Oscilloscopes & Ground Testers
List Price	$11.60

Model
Cat. #	5000.19
Description	Power adapter (replacement) 110/230V with US power cord for use with models 8333, 8335, 8336, PEL 105, and C.A 6116
List Price	$220.00
Consult Factory for Availability

Model
Cat. #	5000.45
Description	USB SD - card reader (replacement for Power & Energy Logger Models PEL 52, PEL 102, PEL 103, PEL 112 PEL 113 & PEL 115)
List Price	$18.20

Model
Cat. #	5000.67
Description	Caps - replacement caps (set 4-lg, 5-sm) for PowerPad III models 8435, 8436, PEL 105, & PEL 115
List Price	$82.50

Model
Cat. #	5000.77
Description	Cable reeling box for organizing leads less than 10 ft Instruction Sheet
List Price	$23.50

Model
Cat. #	5000.99
Description	Clip - Safety Alligator - Black (1000V CAT IV, 15A, UL V2)
List Price	$12.50

Model	SL261
Cat. #	1201.51
Description	AC/DC Current Probe Model SL261
List Price	$0.00
Discontinued

Model
Cat. #	2140.46
Description	Cable - 5 ft USB cable for Model 6290, 6292, 8333, 8335, 8336, 8345, 8435, 8436, C.A 6116, C.A 1727 and PEL Series (DISCONTINUED replaced by 2136.80 )
List Price	$0.00
Discontinued

Model	J93-BK
Cat. #	2140.49
Description	AC/DC Current Probe Model J93-BK (SPECIAL ORDER ONLY)
List Price	$0.00
Discontinued

By Industry

Other Product Lines

Power & Energy Logger Model PEL 105

The PEL Family of Loggers Android Application

User Manuals

Quick Start Guides

Datasheets

Brochures

Rent Now

Comparison Charts

Software

Application Notes

White Papers

Forms