Products

Search this category

Contact Us

 

Join our Mailing List

Electrical Test Tools

Everyday low cost measurement tools to help you measure voltage and current.

Electrical Test Tools

AEMC® offers economically priced phase/motor rotation meters, line splitters, voltage and outlet testers employing both contact and non-contact measurement. Essential for every electrician’s tool bag.

  • Voltage Tester Model C.A 771

    Cat. #2121.14
    (LEDs, 12VAC ≤ U ≤ 1000VAC; 12VDC ≤ U ≤ 1400VDC)

  •

    Voltage Tester Model C.A 773

    Cat. #2121.15
    Voltage Tester Model C.A 773 (LEDs & Backlit Display, 12VAC ≤ U ≤ 1000VAC; 12VDC ≤ U ≤ 1400VDC)

  •

    Phase Rotation Meter Model 6608

    Cat. #2121.10
    Operating voltages 40 to 850VAC between phases, Frequency range 15 to 400HZ, Test current 1mA
    Verify proper phase wiring, detect open or de-energized phases and determine correct wiring for proper rotation on motors, pumps, etc.

  •

    Phase & Motor Rotation Meter Model 6609

    Cat. #2121.11
    Operating voltages: Leads Connected 40 to 600VAC Between Phases, Unconnected 120 to 400VAC Between Phases, Frequency range 15 to 400HZ
    Verify proper phase wiring, detect open or de-energized phases and determine correct wiring for proper rotation on motors, pumps, etc.

  •

    Phase Rotation Meter Model 6610

    Cat. #2121.12
    Operating voltage 75 to 1000VAC, Frequency range 45 to 65Hz
    Verify proper phase wiring, detect open or de-energized phases and determine correct wiring for proper rotation on motors, pumps, etc.

  •

    AC Line Splitter Model ALS-1

    Cat. #2121.05
    Current monitoring (X1 and X10), Voltage monitoring
    Provides temporary separation of conductors to facilitate measurement of current. Increases the sensitivity of clamp-on current probes and clamp-on meters. Two clamp positions: X1 for direct readings; X10 for actual reading multiplied by 10. Also features voltage check function.

  •

    Low Voltage Two-Pole Absence Detector Model C.A 742 DDT

    Cat. #903.1917.42Z
    The C.A 742 Voltage Absence Tester is an essential tool for any electrician to check that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600V CAT IV installation. To fulfil the requirements of the standards and legislation in certain countries, there are 2 references, with or without IP2X accessories.

  •

    Non-Contact AC Voltage Detector Model NC-1

    Cat. #2121.09
    Voltage sensitivity 120 to 240VAC, Frequency 50/60Hz, Detection distance <5mm, Overvoltage 600V
    Non-contact AC voltage detector with a sensitivity range of 120 to 240VAC, detection distance of <5mm, and overvoltage of 600V. Safety rated 600V CAT III, for indoor use.

  •

    Auto-Scan SMD Tester Model TCX01

    Cat. #7900.01
    Auto-Scan SMD Tester Model TCX01

DISCOVER THE CHAUVIN ARNOUX GROUP

©2018 Chauvin Arnoux, Inc. d.b.a. AEMC Instruments. All Rights Reserved.
Contact