Downloads

OX Oscilloscope Software & Firmware

FIRMWARE - SCOPIX IV

Version: v1.12 | 03/15/22

Manual firmware upgrade for the follwing SCOPIX IV, Oscilloscope Models - OX 9062, OX 9102,OX 9104 and OX 9304

NOTE:  Firmware version v1.12 is only compatible with v6.3 of the SX-Metro software.

Follow these instruction to upgrade your Firmware: HOW TO INSTALL SCOPIX IV FIRMWARE INSTRUCTIONS 

To upgrade your oscilloscope, download this zipped file: Install SCOPIX IV v1.12 Download (150 MB)​

FIRMWARE - Loader v2.8

Version: v4.23 | 11/12/15

v2.23 - For use with all OX I Series Oscilloscopes
v3.23 - For use with OX II Series Oscilloscopes
v4.23 - For use with all OX III Series Oscilloscopes

To upgrade your Firmware, install the Loader v2.8: Loader v2.8 Download (51 MB)

Follow these instruction to install the Loader properly: HOW TO INSTALL FIRMWARE INSTRUCTIONS


SOFTWARE v6.3

Version: 6.3 | 03/15/22

For use with models OX5022, OX5042, OX5022B, OX5042B, and models OX9062, OX9102, OX9104, OX9302, OX9304 (with firmware version v1.10 or higher)

To install the software SX Metro v6.3, you need to download the .zip file, extract all the files and then run the Setup.exe file.

Executable: SX-METRO Self-extracting v6.3.exe (250 MB)

Zipped File: SX-METRO Software Download v6.3.zip (243 MB)

This software, designed for AEMC® Instruments OX Oscilloscopes, provides the following functions:

  • Acquisition, recording and processing of curves from the oscilloscope
  • Importing of screenshots
  • Back-up or recovery of configurations
  • Display curves in real time
  • Communicate with the oscilloscope via TCP/IP network connection
  • Transfer of data to Excel or Text files
  • Mathematical processing, such as FFT of displayed signal

 

Languages

Five languages are supported: German, English, Spanish, French and Italian.


USB DRIVER

Install the USB driver onto a computer to communicate with the device hardware.

OX USB Driver Download (7 MB)

DISCOVER THE CHAUVIN® ARNOUX GROUP