AC/DC Current Probe Model MH60

The Model MH60 is a portable 100Arms current probe with insulated BNC output cable that can accurately measure AC or DC current waveforms. The unit has proportional mV output for direct readings on oscilloscopes from DC to 1MHz at -3dB. The MH60 is power by a rechargeable NIMH battery or from a 5 V USB power adaptor. It is the perfect tool for most of the oscilloscopes. 

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.
Model Cat. # Description List Price Quantity/Status Distributor Stock Check
MH60 2153.03 AC/DC Current Probe Model MH60 $715.00
Cat. #2153.03
DescriptionAC/DC Current Probe Model MH60
List Price$715.00
Maximum Conductor Size 1.02" (26mm)
Current Range 100AAC/DC
Measurement Range 0.5A to 100AAC/DC
Output 10mV/A
Lead Length 6.5ft (1.9m)
Output Termination BNC connector
Accuracy (Typical) 0.5 to 64A: ±1.15% ±0.1mV
64 to 90A: ±4%
90 to 100Arms: ±5%
Phase Shift at 50Hz ±1°
Bandwidth with Filter 1MHz @ -3dB, 30kHz @ -3dB, 3kHz @ -3dB
Frequency Limitation 100Arms at 45kHz continuously
Power Source 1.2V NIMH AAA rechargeable or 5Vdc power adaptor by female type B micro USB
Battery Life 7 to 8 hours continuous use
Compatibility Any oscilloscopes with BNC input
Dimensions  (H x W x D) 5.43 x 1.93 x 1.1” (138 x 49 x 28mm)
Weight 7.04 oz (200g)
Operating Temperature 14° to +122°F  (-10° to +55°C); 10 to 85% RH
Storage Temperature with Battery -4° to +122°F  (-20° to +50°C); 10 to 85% RH
Pollution Degree 2     
Protection IK 04, IP40 (jaws closed), IP30 (jaws open)
EMC EN 61326-1
Safety Compliance EN 61010-2-032, 300V CAT III

User Manuals