AC Current Probe Model MN213

The MN213 is a general purpose AC current probe designed for DMMs and other measuring instruments with current input. It has a 1000:1 ratio and an output of 1mA per Amp in the primary (inside the jaw). The MN213 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs. The MN213 has protective diodes across the output that limit the voltage in open secondary situations.

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.

Model	Cat. #	Description	List Price	Quantity/Status	Distributor Stock Check
MN213	2115.75	AC Current Probe Model MN213 NIST Calibration ($68.00 each)	$0.00	Discontinued

Model	MN213
Cat. #	2115.75
Description	AC Current Probe Model MN213
List Price	$0.00
Discontinued

Maximum Conductor Size	0.78 in (20 mm), bus bar (20x5) mm
Current Range	200 Arms AC
Measurement Range	(0.5 to 240) A
Output	5 ft (1.5 m) lead with 4 mm safety banana plug
Transformation Ratio	1000:1
Output Signal	1m A/A AC (200 mA @ 200 A)
Accuracy 50/60Hz	1 % ± 0.5 A @ 200 A
Frequency Range	40 Hz to 10 KHz
Phase Shift at 50Hz	2.5 ° @ 200 A
Open Secondary Voltage	Limited to < 6 V with diodes
Load Impedance	1 Ω, 10 Ω max with derating
Overload	240 A for 10 min ON, 30 min OFF
Dimensions (H x W x D)	(5.47 x 2.00 x 1.18) in (139 x 51 x 30) mm
Weight With 24” (610mm) Sensor	6.3 oz (180 g)
Operating Temperature	(14 to +131) °F (-10 to +55) °C
Storage Temperature	(-40 to +158) °F (-40 to +70) °C
Operating Humidity	90 % RH
Pollution Degree	2
Ingress Protection (Ip)	IP40
EMC	EN 61326-1
Safety Compliance	EN/IEC 61010-1 600 V CAT III, EN/IEC 61010-2-32

User Manuals

Model MN213

Datasheets

Model MN213 - English

Modelo MN213 - Español

Comparison Charts

Current Probe Selection Chart - English

Current Probe Selection Chart - Español

Application Notes

Glossary of Current Probe Terms

Cat. #	Description	List Price
1017.45	Adapter - 4mm non-insulated for safety leads	$20.00
2118.09	General Carrying Case Dimensions: 13 x 9.5 x 3"	$73.50
2118.46	Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers (600V CAT III)	$46.25
2133.72	Small Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets Dimensions: 13.0 x 9.8 x 9.5"	$36.00

Model
Cat. #	1017.45
Description	Adapter - 4mm non-insulated for safety leads
List Price	$20.00

Model
Cat. #	2118.09
Description	General Carrying Case Dimensions: 13 x 9.5 x 3"
List Price	$73.50

Model
Cat. #	2118.46
Description	Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers (600V CAT III)
List Price	$46.25

Model
Cat. #	2133.72
Description	Small Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets Dimensions: 13.0 x 9.8 x 9.5"
List Price	$36.00

Other Product Lines