MiniFlex^® Flexible Sensors

The MiniFlex^® is a compact flexible AC current transformer composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes.

The MiniFlex^® is lightweight. It does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by overloads. The sensor assembly is insulated for 1000V CAT III; 600V CAT IV. The MiniFlex^® meets EN 61010 and is CE marked.

It has an mV output proportional to the current measured for direct readings on DMMs, data loggers, oscilloscopes, and power or harmonic meters. TRMS measurements are taken when connected to a TRMS meter. The MiniFlex^® is insensitive to DC currents and only the AC component of the measured signal is measured. The flexible sensor is available in lengths of 6", 10", 14", and 24". Perfect for use with Oscilloscope Model OX5042B.

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.

Model	Cat. #	Description	List Price	Quantity/Status	Distributor Stock Check
MF 3000-24-1-1	2132.63	MiniFlex^® 3000A, 24", 1mv/A ,10ft BNC Output NIST Calibration ($75.00 each)	$555.00

Model	MF 3000-24-1-1
Cat. #	2132.63
Description	MiniFlex^® 3000A, 24", 1mv/A ,10ft BNC Output
List Price	$555.00
NIST Calibration ($75.00 each)

Model MF 300-6-2-10 (Cat. #2126.81)
Maximum Conductor Size	1.77" (45mm)	Current Range	30A and 300Arms AC
Measurement Range	0.5 to 300A	Output Signal	100mV/A and 10mV/A
Accuracy	±(1% + 0.25A)	Phase at 50Hz	1.5°
Output Cable	19.6" (0.5m) Coaxial cable with female BNC connector
Model MF 3000-10-2-1 (Cat. #2126.82)
Maximum Conductor Size	2.95" (70mm)	Current Range	300 and 3000Arms AC
Measurement Range	0.5 to 3000A	Output Signal	10mV/A and 1mV/A
Accuracy	±(1% + 0.25A)	Phase at 50Hz	0.8°
Output Cable	19.6" (0.5m) Coaxial cable with female BNC connector
Model MF 3000-14-1-1 (Cat. #2132.60)
Maximum Conductor Size	3.93" (100mm)	Current Range	3000Arms AC
Measurement Range	0.5 to 3000A	Output Signal	1mV/A
Accuracy	±(1% + 0.25A)	Phase at 50Hz	1.5°
Output Cable	10ft (3m) Coaxial cable with female BNC connector
Model MF 3000-24-1-1 (Cat. #2132.63)
Maximum Conductor Size	7.5" (190mm)	Current Range	3000Arms AC
Measurement Range	0.5 to 3000A	Output Signal	1mV/A
Accuracy	±(1% + 0.25A)	Phase at 50Hz	1.5°
Output Cable	10ft (3m) Coaxial cable with female BNC connector

General Specifications

Frequency Range	10Hz to 3KHz
Battery Type	2 x 1.5V AAA/LR3 batteries
Battery Life	70 hours typical
Ampflex® Sensor	The flexible sensor can withhold a temperature of 194°F (90°C) and is resistant to oil and Aliphatic hydrocarbons
Cable Length (Module to Sensor	6 ft (1.83m)
Battery Indicator	yes
Dimensions (H x W x D)	Module: 3.94 x 2.36 x 0.79” (103 x 60 x 20mm)
Weight	0.29 lbs (130g)
Operating Temperature	32° to +122°F (0° to +50°C)
Storage Temperature	-4° to +158°F (-20° to +70°C)
Operating Humidity	80% up to 50°F (122°C)
Pollution Degree	2
Ingress Protection (IP)	IP40
EMC	EN 61326-1
Safety Compliance	EN/IEC 61010-1 600V CAT IV, 1000V CAT III EN/IEC 61010-032:2002

User Manuals

MiniFlex MF 3000-14-1-1/MF 3000-24-1-1

MiniFlex

Brochures

AEMC^® Instruments Product Line Brochure

AEMC^® Instruments Product Line Brochure (FR CAN)

Comparison Charts

Current Probe Selection Chart - English

Current Probe Selection Chart - Español

Application Notes

Glossary of Current Probe Terms

Rogowski Coil Primer

Technical Bulletins

Watts Current Issue 06

Videos

Rogowski Coils Explained

Model	Cat. #	Description	List Price
	2119.94	Adapter – BNC (Female) to 4mm Banana (Male) 600V CAT III Replacement for Cat #2111.32 (Model SL361 only)	$28.00
	2133.72	Small Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets. Dimensions: (13.0 x 9.8 x 9.5) in. For use with PEL Models: PEL 102, PEL 103, PEL 112 & PEL 113, DMM/Oscilloscope/Power Analyzer Model: OX 5042B, Megohmmeters Models: 5050, 5060, 5070 & 6505, 6550 & 6555.Data Loggers Models: DL913 & DL 914.	$39.00
	2133.73	Extra Large Classic Tool Bag Replacement for Models: 3945/3945-B, 6240, 6255, 6292, 6471, 6505, 5050, 5060, 5070, 8333, 8335, 8336, 8435, 8436, 8510 & PEL105 Dimensions: (18 x 9 x 12) in	$58.00
MA193-10-BK	2140.48	MiniFlex® Sensor 10" Model MA193-10-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series NIST Calibration ($75.00 each)	$278.00
2140.50	2140.50	MiniFlex® Sensor 14" Model MA193-14-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series NIST Calibration ($75.00 each)	$309.00

Model
Cat. #	2119.94
Description	Adapter – BNC (Female) to 4mm Banana (Male) 600V CAT III Replacement for Cat #2111.32 (Model SL361 only)
List Price	$28.00

Model
Cat. #	2133.72
Description	Small Classic Tool Bag for field use. 12 Exterior and 14 Interior pockets. Dimensions: (13.0 x 9.8 x 9.5) in. For use with PEL Models: PEL 102, PEL 103, PEL 112 & PEL 113, DMM/Oscilloscope/Power Analyzer Model: OX 5042B, Megohmmeters Models: 5050, 5060, 5070 & 6505, 6550 & 6555.Data Loggers Models: DL913 & DL 914.
List Price	$39.00

Model
Cat. #	2133.73
Description	Extra Large Classic Tool Bag Replacement for Models: 3945/3945-B, 6240, 6255, 6292, 6471, 6505, 5050, 5060, 5070, 8333, 8335, 8336, 8435, 8436, 8510 & PEL105 Dimensions: (18 x 9 x 12) in
List Price	$58.00

Model	MA193-10-BK
Cat. #	2140.48
Description	MiniFlex® Sensor 10" Model MA193-10-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series
List Price	$278.00
NIST Calibration ($75.00 each)

Model	2140.50
Cat. #	2140.50
Description	MiniFlex® Sensor 14" Model MA193-14-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series
List Price	$309.00
NIST Calibration ($75.00 each)

By Industry

Other Product Lines