MiniFlex® Flexible Sensors

The MiniFlex® is a compact flexible AC current transformer composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes.

The MiniFlex® is lightweight. It does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by overloads. The sensor assembly is insulated for 1000V CAT III; 600V CAT IV. The MiniFlex® meets EN 61010 and is CE marked. It has an mV output proportional to the current measured for direct readings on DMMs, data loggers, oscilloscopes, and power or harmonic meters. TRMS measurements are taken when connected to a TRMS meter. The MiniFlex® is insensitive to DC currents and only the AC component of the measured signal is measured. The flexible sensor is available in lengths of 6", 10", 14", and 24". Perfect for use with Oscilloscope Model OX5042B.

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.
Model Cat. # Description List Price Quantity/Status Distributor Stock Check
MF 3000-10-2-1 2126.82 MiniFlex® 300/3000A, 10", 10mV/1mV/A - Discontinued $0.00 Discontinued
ModelMF 3000-10-2-1
Cat. #2126.82
DescriptionMiniFlex® 300/3000A, 10", 10mV/1mV/A - Discontinued
List Price$0.00
Discontinued
Print
 Model MF 300-6-2-10 (Cat. #2126.81)
Maximum Conductor Size 1.77" (45mm) Current Range 30A and 300Arms AC
Measurement Range 0.5 to 300A Output Signal 100mV/A and 10mV/A
Accuracy ±(1% + 0.25A) Phase at 50Hz 1.5°
Output Cable 19.6" (0.5m) Coaxial cable with female BNC connector
 Model MF 3000-10-2-1 (Cat. #2126.82)
Maximum Conductor Size 2.95" (70mm) Current Range 300 and 3000Arms AC
Measurement Range 0.5 to 3000A Output Signal 10mV/A and 1mV/A
Accuracy ±(1% + 0.25A) Phase at 50Hz 0.8°
Output Cable 19.6" (0.5m) Coaxial cable with female BNC connector
 Model MF 3000-14-1-1 (Cat. #2132.60)
Maximum Conductor Size 3.93" (100mm) Current Range 3000Arms AC
Measurement Range 0.5 to 3000A Output Signal 1mV/A
Accuracy ±(1% + 0.25A) Phase at 50Hz 1.5°
Output Cable 10ft (3m) Coaxial cable with female BNC connector
 Model MF 3000-24-1-1 (Cat. #2132.63)
Maximum Conductor Size 7.5" (190mm) Current Range 3000Arms AC
Measurement Range 0.5 to 3000A Output Signal 1mV/A
Accuracy ±(1% + 0.25A) Phase at 50Hz 1.5°
Output Cable 10ft (3m) Coaxial cable with female BNC connector

General Specifications
Frequency Range 10Hz to 3KHz
Battery Type 2 x 1.5V AAA/LR3 batteries
Battery Life 70 hours typical
Ampflex® Sensor The flexible sensor can withhold a temperature of 194°F (90°C) and is resistant to oil and Aliphatic hydrocarbons
Cable Length (Module to Sensor 6 ft (1.83m)
Battery Indicator yes
Dimensions  (H x W x D) Module: 3.94 x 2.36 x 0.79” (103 x 60 x 20mm)
Weight  0.29 lbs (130g)
Operating Temperature 32° to +122°F  (0° to +50°C)
Storage Temperature -4° to +158°F  (-20° to +70°C)
Operating Humidity 80% up to 50°F (122°C)
Pollution Degree 2
Ingress Protection (IP) IP40
EMC EN 61326-1
Safety Compliance EN/IEC 61010-1 600V CAT IV, 1000V CAT III
EN/IEC 61010-032:2002 

User Manuals

Datasheets

Brochures

Comparison Charts

Application Notes

Technical Bulletins

Videos

Rogowski Coils Explained

Model Cat. # Description List Price Quantity/Status Distributor 
Stock Check
2119.94 Adapter - BNC (Female) to 4mm Banana (Male) 600V CAT III $23.25
2133.72 Small Classic Tool Bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5"
$36.00
2133.73 Bag – Extra Large Classic Tool Bag Replacement for Models 3945/3945-B, 6240, 6250, 6471, 6505, 5050, 5060, 5070, 8333, 8335, 8336, 8436, 8510 & PEL105
Dimensions: 18 x 9 x 12"
$53.00
MA193-10-BK 2140.48 MiniFlex® Sensor 10" Model MA193-10-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series $275.00
2140.50 2140.50 MiniFlex® Sensor 14" Model MA193-14-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series $299.00
Model
Cat. #2119.94
DescriptionAdapter - BNC (Female) to 4mm Banana (Male) 600V CAT III
List Price$23.25
Model
Cat. #2133.72
DescriptionSmall Classic Tool Bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5"
List Price$36.00
Model
Cat. #2133.73
DescriptionBag – Extra Large Classic Tool Bag Replacement for Models 3945/3945-B, 6240, 6250, 6471, 6505, 5050, 5060, 5070, 8333, 8335, 8336, 8436, 8510 & PEL105
Dimensions: 18 x 9 x 12"
List Price$53.00
Model MA193-10-BK
Cat. #2140.48
DescriptionMiniFlex® Sensor 10" Model MA193-10-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series
List Price$275.00
Model 2140.50
Cat. #2140.50
DescriptionMiniFlex® Sensor 14" Model MA193-14-BK for Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, 8345, 8435, 8436 & PEL Series
List Price$299.00

DISCOVER THE CHAUVIN® ARNOUX GROUP