Join our Mailing List

 

Click here for UPS Delivery Times


Simple Logger® II Model L101

The Simple Logger® II Model L101 is a one channel recording device powered by an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency 50 or 60Hz. Harmonic measurements are calculated from these 64 samples. Harmonics are only available from the Simple Logger® II Control Panel within the free DataView® software included with the unit. The L101 records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the inputs are ignored between measurement intervals.

Recommended Probes: 
MN379T
SR661
JM861
Other probes are compatible when using BNC adapter cat.# 2118.46. See our Probe Selection Chart for all compatible probes or contact AEMC for more information

NOTE: Our complete catalog is not available for direct online purchase, refer to the Status Column for purchasing options. Items that do not have an Add to Cart button must be purchased from an Authorized Distributor.
Model Cat. # Description List Price Quantity/Status Distributor Stock Check
L101 2126.02 Simple Logger® II Model L101 $389.00
Sale: $311.20
ModelL101
Cat. #2126.02
DescriptionSimple Logger® II Model L101
List Price$389.00
Sale: $311.20
Print
Channels One
Input BNC
Ranges (2) 10mV to 1VAAC
Accuracy (50/60Hz) 10 to 50mV ±(0.5% R +1mV)
50 to 1000mV (0.5% R +0.5mV)
Resolution 0.1mVAC
Maximum Input Voltage 5Vrms or ± 7.07VPEAK
Input Impedance 800kΩ
Sample Rate 64 samples / cycle
Storage Rate Programmable from 125ms to 1 per day
Storage Modes Start/Stop, FIFO, extended mode (XRM) and Alarm
Recording Length 15 minutes to 6 weeks, programmable using DataView
Memory 240,000 measurements (512KB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed.
Communication USB 2.0 optically isolated
Power Source 2x1.5V AA (LR6) alkaline batteries
Battery Life 100 hours to >45 days (depending of sample rate/recording length)
Dimensions 5.38 x 2.75 x 1.28” (136 x 70 x 32mm)
Sensor Optional current probe with BNC output (SR661, SL261, MN261)
Weight (with battery) 6.4 oz (180g)
Case Polycarbonate
Operating Temperature 14° to 122°F (-10° to 50°C)
Storage Temperature -4° to 140°F (-20° to 60°C)
Relative Humidity Up to 85% @ 95°F (35°C)
Ingress Protection (IP) IP40
EMC EN 61326-1
Safety Compliance IEC 61010-1, EN 61010-2-32 600V CAT III ; Pollution Degree 2

User Manual

Quick Start Guide

Datasheet

Brochure

Comparison Chart

Software/Firmware

DataView Software

Ver. 3.61.0008   Open Release Notes for the latest updates   |   Models Supported by DataView
Release Date: November 12, 2019

DataView Complete (Report generation and control panels)
Executable: Version 3.61.0008 - .exe
Zipped File: 471MB Version 3.61.0008 - .zip

IMPORTANT:

  • Back-up all template files before installation to ensure that they do not get overwritten.
  • Uninstall previous versions of DataView before installing a new version.
  • PQL Loggers and Sentinel Series are no longer supported by DataView. See bottom of the page for a compatible version

Supported Operating Systems:
Windows 7 (32 & 64 Bit)
Windows 8/8.1 (32 & 64 Bit)
Windows 10 (32 & 64 Bit)

Click here for the Minimum System Requirements



Below are the individual DataView component installers

This is the DataView core report generation software without any control panels

Release Date: 07/15/19
77MB Download v3.61.0008 .zip format

This control panel supports models: L452, 1510, 1821, 1822, 1823, 1110, 1246, 1227, 10101, and 10141

Release Date: 02/25/19
75MB Download v2.02.0085 .zip format
This control panel requires DataView version 3.61.0008 or higher

This control panel supports model 8510

Release Date: 02/25/19
40MB Download v1.02.0006 .zip format
This control panel requires DataView version 3.61.0008 or higher

This control panel supports model 6417

Release Date: 02/25/19
57MB Download v1.02.0004 .zip format
This control panel requires DataView version 3.61.0008 or higher

This control panel supports models: 6470-B, 6471, and 6472

Release Date: 02/25/19
44MB Download v1.05.0003 .zip format
This control panel requires DataView version 3.61.0008 or higher

This control panel supports models: 6116, 6116N, and 6117

Release Date: 02/25/19
65MB Download v1.07.0022 .zip format
This control panel requires DataView version 3.61.0008 or higher

This control panel supports models: 1060, 5060, 5070, 6550, 6555, 6526, 6532, and 6534

Release Date: 02/25/19
57MB Download v4.02.0071 .zip format
This control panel requires DataView version 3.61.0008 or higher

This control panel supports models: 6240, 6250, 6255, and 6292

Release Date: 02/25/19
47MB Download v1.07.0005 .zip format
This control panel requires DataView version 3.61.0008 or higher

This control panel supports models: 8220, 8230, 3945-B, 407, 607, and 8335 (if using firmware ≤2.8)

Release Date: 09/17/19
70MB Download v3.08.0019 .zip format
This control panel requires DataView version 3.61.0008 or higher

This control panel supports models: 8333, 8335 (if using firmware >2.8), 8336, 8435, 8436

Release Date: 11/12/19

67MB Download v1.07.13010 .zip format
This control panel requires DataView version 3.61.0008 or higher

This control panel supports models: PEL102, PEL103, and PEL105
39MB Download v2.5.12642 .zip format

Release Date: 06/03/19
This control panel requires DataView version 3.61.0008 or higher

This control panel supports models: L261, L264, CL601, L702, L101, L102, L104, L642, L111, L432, AL834, ML912, ML914, L322, L562, L564, L404, and L481

Release Date: 10/17/19
63MB Download v1.05.0009 .zip format

This control panel requires DataView version 3.61.0008 or higher

 

 


NOTE: PQL Loggers and Sentinel Series are no longer supported by DataView.

To obtain an older version of DataView that is compatible for these instruments, click the link below:

Download v3.09.0008 - .zip format

Supported Operating Systems:
Windows XP
Windows 7 (32 & 64 Bit)
Windows 8/8.1 (32 & 64 Bit)
Windows 10 (32 & 64 Bit)

LabView Drivers

 

  LabView Installation PDF

 
    Megohmmeters
  Ver. 1.0 Model 1060 Overview PDF
  Ver. 1.1 Models 5060 & 5070 Overview PDF
  Ver. 1.0 Models 6550 & 6555 Overview PDF
       
    Power Quality & Energy
  Ver. 1.0 Models 8333, 8435, 8335, & 8336 Overview PDF
  Ver. 1.0 Models PEL 102 & 103 Overview PDF
       
    Simple Logger II Series
 

Ver. 1.0

Simple Logger II

Overview PDF

Simple Logger® II - Firmware

  Important: To ensure that data is not lost, download all data from the instrument before installing any software and firmware updates.
       
 

Version 1.19

Release Notes
 

1.7 MB

SLII Firmware Version 1.19

01/17/17

   
SIMPLE LOGGER® II FIRMWARE

NOTE: When upgrading to version 1.19 from 1.13 or lower it is necessary to perform a “Fail Safe” upgrade.

CLICK HERE FOR UPGRADE INSTRUCTIONS
Version 1.19  pdf icon  

SOFTWARE REQUIREMENTS

To use the Simple Logger® II Firmware, you should ensure that you are using the latest version of DataView.

   
       
       

Application Notes

Forms

Technical Bulletin

Video

What's New in DataView 3.50

Introduction To Data Loggers

Model Cat. # Description List Price Quantity/Status Distributor 
Stock Check
JM861 2110.90 AC Current Probe Model JM861
(30A, 10mV/A; 300A, 1mV/A & 3000A, 0.1mV/A, BNC)
$610.00
1000-24-1-1 2112.39 AmpFlex-1000A, 24", 1mV/A $394.00 Out of Stock Consult Factory for Availability
300-24-2-10 2112.88 AmpFlex-30/300A, 24", 100mV/10mV/A $399.00
1000-24-2-1 2112.98 AmpFlex-100/1000A, 24", 10mV/1mV/A $404.00
30000-24-2-0.1 2113.33 AmpFlex-3000/30000A, 24", 1mV/0.1mV/A $434.00
SR661 2113.49 AC Current Probe Model SR661
(10A, 100mV/A; 100A, 10mV/A & 1000A, 1mV/A, BNC)
$314.00
3000-24-2-0.3 DISCONTINUED 2114.87 AmpFlex-300/3000A, 24", 3.3mV/0.3mV/A DISCONTINUED $0.00 Discontinued
MN375 2115.41 AC Current Probe Model MN375 $240.00
MN251 2115.77 AC Current Probe Model MN251
(200A, 1mV/A, Lead)
$174.00
MN255 2115.81 AC Current Probe Model MN255 $174.00
MN261 2115.82 AC Current Probe Model MN261
(20A, 100mV/A & 200A, 10mV/A, BNC)
$204.00
MN353 2116.27 AC Current Probe Model MN353 $209.00
MN373 2116.28 AC Current Probe Model MN373 $225.00
SR752 2116.32 AC Current Probe Model SR752 $319.00
SR759 2116.33 AC Current Probe Model SR759 $369.00
2118.09 General Carrying Case
Dimensions: 13 x 9.5 x 3"
$58.95
2118.46 Adapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III)
$44.00
2126.49 Cable – Replacement USB (type A to 5-pin mini-B) cable for Simple Logger® II series and Model 1950 (RoHS Compliant) $8.25
MF 300-6-2-10 2126.81 MiniFlex® 30/300A, 6", 100mV/10mV/A $424.00 Out of Stock Consult Factory for Availability
MN03 2129.18 AC Current Probe Model MN03
(100AAC/0.1VAC (1mV/A), Lead)
$89.00 Out of Stock Consult Factory for Availability
2133.72 Compact tool bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5"
$33.50
MN93-BK 2140.32 AC Current Probe Model MN93-BK $194.00
MN93-BK 2140.32 AC Current Probe Model MN93-BK $194.00
MN193-BK 2140.36 AC Current Probe Model MN193-BK $265.00
MN379 2153.01 AC Current Probe Model MN379 $245.00
Model JM861
Cat. #2110.90
DescriptionAC Current Probe Model JM861
(30A, 10mV/A; 300A, 1mV/A & 3000A, 0.1mV/A, BNC)
List Price$610.00
Model 1000-24-1-1
Cat. #2112.39
DescriptionAmpFlex-1000A, 24", 1mV/A
List Price$394.00
Out of Stock Consult Factory for Availability
Model 300-24-2-10
Cat. #2112.88
DescriptionAmpFlex-30/300A, 24", 100mV/10mV/A
List Price$399.00
Model 1000-24-2-1
Cat. #2112.98
DescriptionAmpFlex-100/1000A, 24", 10mV/1mV/A
List Price$404.00
Model 30000-24-2-0.1
Cat. #2113.33
DescriptionAmpFlex-3000/30000A, 24", 1mV/0.1mV/A
List Price$434.00
Model SR661
Cat. #2113.49
DescriptionAC Current Probe Model SR661
(10A, 100mV/A; 100A, 10mV/A & 1000A, 1mV/A, BNC)
List Price$314.00
Model 3000-24-2-0.3 DISCONTINUED
Cat. #2114.87
DescriptionAmpFlex-300/3000A, 24", 3.3mV/0.3mV/A DISCONTINUED
List Price$0.00
Discontinued
Model MN375
Cat. #2115.41
DescriptionAC Current Probe Model MN375
List Price$240.00
Model MN251
Cat. #2115.77
DescriptionAC Current Probe Model MN251
(200A, 1mV/A, Lead)
List Price$174.00
Model MN255
Cat. #2115.81
DescriptionAC Current Probe Model MN255
List Price$174.00
Model MN261
Cat. #2115.82
DescriptionAC Current Probe Model MN261
(20A, 100mV/A & 200A, 10mV/A, BNC)
List Price$204.00
Model MN353
Cat. #2116.27
DescriptionAC Current Probe Model MN353
List Price$209.00
Model MN373
Cat. #2116.28
DescriptionAC Current Probe Model MN373
List Price$225.00
Model SR752
Cat. #2116.32
DescriptionAC Current Probe Model SR752
List Price$319.00
Model SR759
Cat. #2116.33
DescriptionAC Current Probe Model SR759
List Price$369.00
Model
Cat. #2118.09
DescriptionGeneral Carrying Case
Dimensions: 13 x 9.5 x 3"
List Price$58.95
Model
Cat. #2118.46
DescriptionAdapter - Banana (Female) - BNC (Male) (XM-BB) for use with AmpFlex Sensors, Models K100/K110 and SLII Data Loggers
(600V CAT III)
List Price$44.00
Model
Cat. #2126.49
DescriptionCable – Replacement USB (type A to 5-pin mini-B) cable for Simple Logger® II series and Model 1950 (RoHS Compliant)
List Price$8.25
Model MF 300-6-2-10
Cat. #2126.81
DescriptionMiniFlex® 30/300A, 6", 100mV/10mV/A
List Price$424.00
Out of Stock Consult Factory for Availability
Model MN03
Cat. #2129.18
DescriptionAC Current Probe Model MN03
(100AAC/0.1VAC (1mV/A), Lead)
List Price$89.00
Out of Stock Consult Factory for Availability
Model
Cat. #2133.72
DescriptionCompact tool bag for field use.
12 Exterior and 14 Interior pockets
Dimensions: 13.0 x 9.8 x 9.5"
List Price$33.50
Model MN93-BK
Cat. #2140.32
DescriptionAC Current Probe Model MN93-BK
List Price$194.00
Model MN93-BK
Cat. #2140.32
DescriptionAC Current Probe Model MN93-BK
List Price$194.00
Model MN193-BK
Cat. #2140.36
DescriptionAC Current Probe Model MN193-BK
List Price$265.00
Model MN379
Cat. #2153.01
DescriptionAC Current Probe Model MN379
List Price$245.00

DISCOVER THE CHAUVIN ARNOUX GROUP