| Model | Cat. # | Description | List Price | Quantity/Status | Distributor Stock Check |
|---|---|---|---|---|---|
| 5070 | 2130.30 | Megohmmeter Model 5070 | $4,575.00 | In stock at factory. Find a Distributor |
|
|
||||||||||
Model 5070 - Cat. #2130.30: Includes extra large classic tool bag, set of (3) 10 ft (5kV) leads (red/black/blue) with integral 5000V rated hippo clips, (1) guard terminal jumper lead, (1) 5 ft USB A-B cable, US 115V power cord, rechargeable battery pack and a USB stick with DataView® software and user manual.
| AC/DC Voltage Measurement | |
| Range | 1 to 4000V |
| Accuracy | 1 to 99.9V: ±(1% R + 5ct) 100 to 4000V: ±(1% R + 3ct) |
| Resolution | 1 to 99.9V: 0.1V 100 to 999V: 1V 1000 to 4000V: 2V |
| Frequency Range | 1 to 2500V: DC or 15 to 500Hz 2501 to 4000V: DC |
| Input Impedance | 750kΩ or 3MΩ (range dependent) |
| Insulation Measurement | |
| Test Voltage / Resistance Range | 500V: 30kΩ to 2TΩ 1000V: 100kΩ to 4TΩ 2500V: 100kΩ to 10TΩ 5000V: 300kΩ to 10TΩ |
| Measurement Accuracy | 30kΩ to 39.99GΩ: ±(5% R + 3ct) 40.0GΩ 10TΩ: ±(15% R + 10ct) |
| Variable Voltage | 40 to 5,100V |
| Auto Discharge | Discharge time < 7s/µF from Vtest to 25V @ 5000V |
| Live Circuit Indicator | Test inhibition if terminal voltage > 3, 10, 20% (selectable by user) of test voltage |
| General Features | |
| Programmable Alarm | Yes |
| DAR – PI – DD – R(t) | Yes |
| Ramp Mode | No |
| Step Mode | Up to 5 steps (voltage and duration configurable for each step) |
| Capacitance Measurement | 0.005 to 49.99µf |
| Leakage Current Measurement | 0 to 3mA |
| Open Circuit Voltage | ≤ 1.1 x Vn ±2V (Vn ±2% in variable mode) |
| Memory | 128kB Memory / Stores over 1500 test results |
| Communication | USB port |
| Software | DataView Software (included) |
| Power Supply | Rechargeable NIMH battery pack; external 85-256V, 50/60Hz |
| Battery Life | ≥ 1500 tests at 5000V into 5MΩ with a duty cycle of 5 seconds on and 25 seconds off |
| Charging Time | 6 hours approximately (charging allowed during tests) |
| Dimensions | 10.63 x 9.84 x 7.09” (270 x 250 x 180mm) |
| Weight | 9.5lbs (4.3kg) |
| Altitude Operating | 6562' (2000m) |
| Operating Temperature | 14° to +131°F (-10° to +55°C) ≤80% RH |
| Storage Temperature | -40° to +158°F (-40° to +70°C) ≤90% RH |
| IP Rating | IP 53 |
| Safety Compliance | EN 61010-1, EN 61557, 1000V CAT III, Pollution Degree 2, CE |
User Manuals
Model 5070
Model 5070 - Español (CA France version)
Model 5070 - French (CA France version)
Megohmmeter Calibration Checker
Datasheets
Brochures
Megohmmeter Brochure
AEMC® Instruments Product Line Brochure
AEMC® Instruments Product Line Brochure (FR CAN)
Comparison Charts
Software
DataView® Software
Ver. 3.63.0006 | Models Supported by DataView
Release Date: September 29, 2023
DataView® Complete
Contains report generation and ALL DataView® control panels. If you don't want to download the entire DataView® package, simple scroll below to locate individual component installers.Self-extracting Executable: v3.63.0006 .exe — We recommend you use the executable file to simplify the installation process. Click on the link to download it, double-click on the downloaded .exe file to begin the installation process, and follow the installation prompts.
Zipped File: v3.63.0006 (1.08 GB). zip — Alternatively you can manually extract the files from the zipped file. Please note: you should NEVER install these files from within the zipped file. You MUST extract them prior to installing.
IMPORTANT:
- Back-up all template files before installation to ensure that they do not get overwritten.
- Uninstall previous version of DataView before installing a new version.
- PQL Loggers and Sentinel Series are no longer supported by DataView. See bottom of the page for a compatible version
Supported Operating Systems:
Windows 10 (32 & 64 Bit)
Widows 11 Pro
Minimum System Requirements
Below are the individual DataView component installers
This is the DataView core report generation software without any control panels
DataviewCore3630006.exe format
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: 1110, 1246, 1227, 1510, 1550, 1821, 1822, 1823, L452, DL913, and DL914
Download v2.02.0293 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports model 8510
Download v1.02.0006 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports model 6417
Download v1.02.0011 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: 6470, 6470-B, 6471, 6472, and 6474
Download v1.06.0009 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: 6116, 6116N, and 6117
Download v1.07.0022 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: 1060, 5060, 5070, 6550, 6555, 6526, 6532, and 6534
Download v4.02.0071 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: 6240, 6250, 6255, and 6292
Download v1.07.0005 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: 8220, 8230, 3945, 3945-B, 407, 607, and 8335 (if using firmware ≤2.8)
Download v3.08.0019 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: 8333, 8335 (if using firmware >2.8), 8336, 8435, 8436
Download v1.07.13010 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: 8345
Download v1.2.14966 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: PEL 52, PEL102, PEL103, and PEL105
Download v2.8.15349 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
This control panel supports models: L261, L264, CL601, L702, L101, L102, L104, L642, L111, L432, AL834, ML912, ML914, L322, L562, L564, L404, and L481
Download v1.05.0014 .exe format
This control panel requires DataView version 3.61.0008 or higher to access reports.
NOTE: You must install DataView® core prior to installing and using a DataView® Control Panel.
NOTE: PQL Loggers and Sentinel Series are no longer supported by DataView.
To obtain an older version of DataView that is compatible for these instruments, click the link below:
Download v3.09.0008 - .zip format
Supported Operating Systems:
Windows 8/8.1 (32 & 64 Bit)
Windows 10 (32 & 64 Bit)
LabView Drivers
Procedures for installing the LabView drivers. LabView Installation PDF
| Digital Multimeters - MTX-3292B, MTX3292BT, MTX3293B, MTX3293-BT | |||
| Ver. 1.0 | LabView Drivers | ||
| Megohmmeters | |||
| Ver. 1.0 | Model 1060 | Overview PDF | |
| Ver. 1.1 | Models 5060 & 5070 | Overview PDF | |
| Ver. 1.0 | Models 6550 & 6555 | Overview PDF | |
| Power Quality & Energy | |||
| Ver. 1.0 | Models 8333, 8435, 8335, & 8336 | Overview PDF | |
| Ver. 1.0 | Models PEL 102 & 103 | Overview PDF | |
| Simple Logger II Series | |||
|
Ver. 1.0 |
Overview PDF | ||
| SCOPIX IV – OX9000 Series | |||
|
Ver. 1.0 Ver. 1.0 |
|||
Application Notes
Battery Recharge Time / Rechargeable NiMH Notice
Tiempo de recarga de las baterías / Aviso de NiMH recargable
An Introduction to Insulation Resistance Testing
True RMS, True InRush, and True Megohmmeter
Megohmmeter Calibration Checker and Ground Resistance Checker
Megohmmeter Insulation Testing After Flood Damage
Forms
Technical Bulletins
Videos
Understanding Insulation Resistance Testing
What's New in DataView 3.50
| Model | Cat. # | Description | List Price | Quantity/Status | Distributor Stock Check |
|---|---|---|---|---|---|
|
2119.45 | Cable – Replacement PC RS-232, DB9 F/F 6 ft Null Modem Cable for 1060, 5060 & 5070 (for units purchased before July 1, 2022), 6250, and 6255 | $20.00 |
|
|
|
2119.78 | Lead - Replacement 1 ft Jumper Lead (5kv) for use with Megohmmeter Models 5050, 5060, 5070 & 6505 | $87.00 |
|
|
|
2119.82 | Multi-purpose Large Canvas Bag Dimensions: 22 x 10.5 x 12" |
$166.00 |
|
|
|
2119.84 | Fuse - Set of 3, 0.1A, 380V, 5 x 20mm, 10kA for Models 5050/5060/5070/6505 | $33.00 |
|
|
|
2133.73 | Bag – Extra Large Classic Tool Bag Replacement for Models 3945/3945-B, 6240, 6250, 6471, 6505, 5050, 5060, 5070, 8333, 8335, 8336, 8436, 8510 & PEL105 Dimensions: 18 x 9 x 12" |
$53.00 |
|
|
|
2135.43 | Inverter - 12VDC to 120VAC 200 Watt for Vehicle Use (use with Ground Testers, Megohmmeters & Micro-ohmmeters) | $90.00 |
|
|
|
2136.80 | Cable – 10 ft USB Type A to Type B for use with Models 8333, 8335, 8336, 8435, 8436, PEL 102, PEL 103, PEL 105 (Replacement for Models DTR® 8510, C.A6116, DL913, DL914, 5060, and 5070) | $19.00 |
|
|
|
2151.30 | Lead - Replacement, Set of 3, 10 ft 5kV Safety w/ Clips for Models 5050/5060/5070 and 6505 | $540.00 |
|
|
|
2151.31 | Lead - Replacement 1 ft Blue Jumper Lead (5kv) for use with Megohmmeter Models 5050/5060/5070 and 6505 | $136.50 |
|
|
|
2151.32 | Lead - Set of 3, 25 ft 5kV Safety w/ Clips for Models 5050/5060/5070 and 6505 | $860.00 |
|
|
|
|
2151.33 | Lead - Set of 3, 45 ft 5kV Safety w/ Clips for Models 5050/5060/5070 and 6505 | $1,280.00 | Consult Factory for Availability |
|
|
2960.21 | Replacement 9.6V Rechargeable Battery Pack for Models 1060, 5050, 5060, 5070, 6505, 4630, 6470/6470-B, 6471 & 6472 | $187.50 |
|
|
|
5000.14 | Power cord 115V for Micro-ohmmeters, Megohmmeters, Power Instruments, Oscilloscopes & Ground Testers | $10.00 |
|
|
|
5000.30 | Probe - black test probe {Rated 1000V CAT IV, 15A, UL} replacement for Megohmmeter lead sets | $6.00 |
|
|
|
5000.60 | Adapter - RS-232 to USB 2.0 replacement for models 3945-B, 1060, 5060 & 5070 (for units purchased before July 1, 2022), 6250, & 6255 | $58.50 |
|
|
|
5000.66 | Megohmmeter calibration checker - provides two test resistances of 150kO and 100MO.
NOTE: The 150kO terminal accepts test voltages up to 1000V. The 100MO terminal accepts voltages up to 2500V. |
$136.00 | Consult Factory for Availability | |
|
5100.02 | Latches - Replacement set of 2 for use with AEMC Yellow cases | $13.25 |
|
|
|
2119.76 | Lead - Set of 3, Color-coded 10ft 5kv Safety w/3 Color-coded Alligator Clips {Rated 1000V CAT IV, 15A}, for Megohmmeter Models 5050, 5060, 5070 & 6505 - Discontinued suggested replacement 2151.30 | $0.00 | Discontinued | |
|
2119.85 | Lead – Set of 3, 10 ft Color-coded 5kV Safety with Integral Hippo Clips, and Jumper Lead for Megohmmeter Model 6505 (Replacement for 5050, 5060 & 5070) Discontinued suggested replacement 2151.30 and 2151.31 (jumper) | $0.00 | Discontinued |
|
|
2119.86 | Lead – Set of 3, 25 ft Color-coded 5kV Safety with Integral Hippo Clips for Megohmmeter Models 5050, 5060, 5070 & 6505 [Jumper lead not included] - Discontinued suggested replacement 2151.32 | $0.00 | Discontinued |
|
|
2119.87 | Lead – Set of 3, 45 ft Color-coded 5kV Safety with Integral Hippo Clips for Megohmmeter Models 5050, 5060, 5070 & 6505 [Jumper lead not included] - Discontinued suggested replacement 2151.33 | $0.00 Sale: $0.00 |
Discontinued |
|
|
5000.31 | Cat.# 5000.31 is DISCONTINUED. Click on replacement item: Cat. #5000.98: Probe - red test probe {Rated 1000V CAT IV, 15A, UL V2}. | $0.00 | Discontinued |
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
